Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateStyles & brands we work with
See the difference
Before
After
Before
After
Before
AfterGate Repair Near You in Houston, TX
If your gate won’t open, sags on its hinges, or groans like it’s about to give up, you need a repair crew that’s close and answers the phone. Portcullis Gate Repair Houston serves homeowners and businesses across the Greater Houston area with same-day and next-day service in most cases. Call (325) 378-0676 and you’ll talk to a live person, not a voicemail tree, any hour of the day or night.
We’re an independently owned Kingswell company, which means every job we do is held to the four Kingswell Guarantee promises: a written price before work starts, a real arrival window, a clean job site, and a written guarantee on the repair. Dean Prescott runs this location, and he’s the one who signs off on the guarantee that’s stamped on your invoice.
Fast, Local Gate Repair
We work all over Houston and the surrounding suburbs, and when we say we’ll show up, we mean it. Most repair calls in Houston proper get a tech out the same day. Pasadena, League City, Missouri City, West University Place, Tomball, Friendswood, and Rosenberg are all within our normal route, and we schedule those on a next-day basis in almost every situation.
The tech who arrives is background-checked and in uniform, and they already know what gate operator is likely on the property before they get out of the truck. We carry parts for LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule, so most fixes happen on the first visit, not after a week of waiting on a backordered board. The price goes in writing before a single bolt gets turned, and the repair is covered by the 365-Day Done Right Promise. If the fix fails inside a year, we come back at no charge. That’s what the guarantee says, in writing, on every invoice.
What We Repair on Gates in Houston
Houston’s heat and humidity are rough on gate hardware. The salt air down toward League City and Friendswood corrodes hinges and circuit boards faster than almost anywhere else in the state. Here’s what we handle most often:
Swing Gate Actuators
The actuator is the motorized arm that physically pushes the gate open and pulls it shut. In Houston’s climate, water gets past the seal, condenses inside the housing, and takes out the limit switches or the motor itself. A swing-gate actuator swap on a single-leaf residential gate in Houston typically runs $600 to $1,100 parts and labor, depending on the brand and whether it’s a 12V DC or 24V AC system. Same-day service is common on these because we stock actuators for all nine brands we service.
Slide Gate Rollers and Track
Slide gates ride on steel rollers along a track, and Houston’s clay soil shifts constantly, especially after the spring rains. When the track goes out of level, the gate drags, the motor strains, and the rollers wear out fast. Replacing a set of rollers and re-leveling the track usually runs $250 to $500. We check the motor’s current draw before and after, because a dragging gate that’s been ignored too long often kills the operator, too.
Gate Operator Circuit Boards
The operator is the metal box that houses the motor and the brains of the system. The circuit board is the part that tells the motor when to run, and when lightning or a power surge hits, it’s often the first component to fail. Replacement boards for Gate operators in Houston run $300 to $700 depending on make and model, and we carry boards for LiftMaster, FAAC, BFT, Viking, and DoorKing on the truck.
Safety Sensor Misalignment and Failure
Photo eyes mounted near the base of the gate send a beam across the opening. When that beam breaks, the gate reverses so it doesn’t close on a car or a kid’s bike. Houston’s storms knock the mounts out of alignment constantly, and UV exposure from the sun degrades the lens covers over a few seasons. A sensor repair or replacement is usually $150 to $300, and it’s one of the most common calls we run in West University Place and Missouri City neighborhoods with high pedestrian traffic.
Hinge and Post Repair
Heavy wooden and steel gates put enormous strain on hinges, and when the post shifts in Houston’s expansive clay soil, the gate starts to sag and scrape. The fix might be as simple as Weld & Rust Repair on a cracked hinge or as involved as resetting the post in fresh concrete. Hinge repair jobs in Houston typically run $200 to $450. Post work runs higher because it involves excavation and concrete.
Gate Won’t Open or Close: Solenoid Locks and Keypads
Lock Repair issues like solenoid locks and keypads fail quietly. One day the code works, the next day it doesn’t, and the gate stays shut. A new keypad runs $150 to $300 installed. A solenoid lock replacement falls in the same range. We handle these for residential and commercial properties across Houston, including the gated communities around Tomball and the commercial lots in Pasadena.
All of these are covered by the 365-Day Done Right Promise. If the repair fails inside the guarantee period, we come back and fix it at no charge. That’s a written guarantee, not a verbal one.
What Does Gate Repair Cost in Houston?
Most gate repairs in Houston fall between $150 and $1,100, with the majority of jobs landing in the $250 to $600 range. Here’s a quick breakdown of common work, using the price ranges we actually quote on the ground in this market:
| Repair Type | Typical Cost Range (Parts & Labor) |
|---|---|
| Sensor repair or replacement | $150 – $300 |
| Hinge repair | $200 – $450 |
| Keypad or solenoid lock replacement | $150 – $300 |
| Slide gate rollers and track leveling | $250 – $500 |
| Circuit board replacement | $300 – $700 |
| Swing gate actuator replacement | $600 – $1,100 |
| Post reset in concrete (clay soil) | $500 – $1,000 |
These are real numbers from the Houston market, not national averages. The exact price depends on the gate’s size, the operator brand, and the condition of the surrounding equipment. What you won’t see is a price that changes once the technician starts pulling parts off. The Kingswell Way says the price goes in writing before work begins, and we follow it on every job.
Areas We Cover
Our home base is Houston, and our service truck runs everywhere inside the Beltway and most of the outer loop every day. That includes Gate Repair in Houston proper and all the nearby cities you’re likely calling from: Pasadena, League City, Missouri City, West University Place, Tomball, Friendswood, and Rosenberg. If you’re inside Harris County or the northern part of Fort Bend or Galveston County, chances are good we’re already in your area once or twice a week.
For commercial properties in Pasadena and the industrial parks off Highway 225, we carry commercial-grade actuators and heavy-duty slide gate hardware on the truck. For the residential neighborhoods in West University Place and Friendswood, most calls are swing gates, sensor alignment, and operator failures. Same-day service is our standard for anything inside the Houston city limits, and the surrounding suburbs are next-day at worst.
How Our Gate Repair Process Works
- Call (325) 378-0676. A live person answers, day or night, including holidays. No voicemail, no callback queue. Tell us what the gate is doing, and we’ll give you a real arrival window right then.
- Arrival and inspection. A uniformed, background-checked technician shows up in that window and inspects the gate, the operator, the sensors, and the mounting hardware. You’ll get a written price before any work starts. That’s the Kingswell Guarantee.
- Repair. We fix what’s broken, and only what’s broken. If something else is likely to fail soon, we tell you and price it separately, but we don’t pressure you to approve extras.
- Cleanup and guarantee. The job site is left cleaner than we found it, and the repair is written up with a 365-day guarantee on the invoice. If it fails inside that year, the return visit is free.
Why Houston Homeowners Call Us After Another Company Burned Them
Most of our customers in Houston have already been through the wringer with another gate company. The tech didn’t show. The price doubled at the door. The repair failed six weeks later and the company’s phone number went to a voicemail that never called back. That’s not a rare story in this market; it’s the norm.
The Kingswell Way exists because that problem is everywhere. The five commitments are plain English and we keep them on every job: say the price before the work; show up in the window we gave; leave the place cleaner than we found it; put the guarantee in writing; come back if it fails. Every Portcullis location is independently owned and operated but held to the identical Kingswell Guarantee. It’s not a franchise promise. It’s a written one, signed by Dean Prescott, the owner at this Houston location.
FAQs
How fast can you get to my gate?
Same-day service is typical for most of Houston, and next-day service is the standard for the surrounding suburbs like Pasadena, League City, Missouri City, West University Place, Tomball, Friendswood, and Rosenberg. Call (325) 378-0676 and we’ll give you a real arrival window before you hang up.
Do you serve my area near Houston?
We cover the entire Houston metro, including Pasadena, League City, Missouri City, West University Place, Tomball, Friendswood, and Rosenberg. If you’re in Harris County or the northern parts of Fort Bend and Galveston Counties, we’re likely already in your area each week. Call (325) 378-0676 and we’ll confirm your location and give you a service window.
How much does it cost to fix a gate in Houston?
Most Houston gate repairs cost between $150 and $1,100, with the majority falling between $250 and $600. Sensor issues and keypads run $150 to $300, hinge repairs run $200 to $450, and a full swing gate actuator replacement runs $600 to $1,100. The price is given in writing before work begins, so the quote you get is the price you pay. Call (325) 378-0676 for a free estimate on your specific gate.
Do you handle after-hours gate emergencies?
Yes. A live person answers our phone 24 hours a day, 7 days a week, including holidays. If your gate is stuck open, stuck closed, or making a grinding noise at 2 a.m., you’ll reach a person who can dispatch a technician. Call (325) 378-0676 any time.
Is it cheaper to repair or replace a gate operator?
In most cases, repair is significantly cheaper. A circuit board replacement runs $300 to $700, while a full operator replacement with labor typically starts around $1,200 and goes up steeply from there. We’ll tell you straight if the operator is too far gone, but most operators have years of life left after a proper board, capacitor, or limit switch repair. Call (325) 378-0676 for an honest assessment.
Do you service my gate operator brand?
We stock parts and have certified service experience on nine major gate operator brands: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. Whatever operator is on the property, our technician arrives already knowing the system. Call (325) 378-0676 and tell us what brand you have, and we’ll make sure the right parts are on the truck.
Need a Gate Repair Tech Near You? Call Now.
If your gate is acting up, don’t wait for it to fail completely. A dragging gate turns into a dead motor, a grinding actuator turns into a snapped arm, and a misaligned sensor turns into a gate that won’t close at all. Call (325) 378-0676 now and get a live person, a real arrival window, and a written price before any work begins. That’s the Kingswell Guarantee, and it’s stamped on every invoice we write in Houston.
Written by Dean Prescott, Owner at Portcullis Gate Repair Houston, serving Houston and nearby areas.
What Our Customers Say
"Gate was dragging and screeching across the driveway. I figured I'd need a whole new setup. He adjusted the track and rollers and it was a fraction of what I expected. Honest work."
- Omar Haddad"Our driveway gate stopped halfway and wouldn't close, which is a problem when it's the only thing between the street and the yard. They came out same day, replaced the motor, and it's smooth again."
- Leonard Pace"Gate wouldn't respond to the remote or the keypad. Turned out to be the control board. They had the part and swapped it the same visit. Quoted it first, no surprises."
- Everett Shaw