FAAC Electric Gate Repair Nationwide

FAAC Electric Gate Repair in Houston: What to Know First

FAAC electric gate repair in Houston typically runs $185 to $480 for most control board, limit switch, and safety sensor jobs, and we complete the majority of FAAC repairs in a single visit. Every job gets a written price before we touch a wrench, and every repair carries a written 365-day guarantee. If you own a FAAC swing or slide gate that won’t open, beeps but won’t move, or reverses for no reason, this page tells you exactly what you’re dealing with and what it costs to make it right. Call (325) 378-0676 and you’ll speak to a live person, not a voicemail tree.

Call (325) 378-0676

How FAAC Products Fail – and How We Fix Them

FAAC builds genuinely well-engineered operators, but Houston’s heat, humidity, and rain expose a handful of failure patterns we see over and over. Here’s what typically goes wrong and how we handle it:

• FAAC 400 series operator won’t respond to the remote or keypad. Nine times out of ten on the 400 series we find the issue is a failed capacitor on the main control board, not the remote itself. The 400’s board is densely packed, and Houston’s summer heat pushes capacitors past their rated temperature. We test the board in place, replace the capacitor or the board as needed, and reprogram the remote limits before we leave.
• FAAC swing gate opens a few inches, then stops or reverses. This is almost always the torque-sensing circuit on the board misreading resistance. In Houston, the usual culprit is a hinge that’s stiffened from rain and humidity, or a gate leaf that’s shifted on its post after a storm. We lubricate and adjust the hinge assembly first, then recalibrate torque. If the board’s torque chip has failed, we replace the board and set limits from scratch.
• FAAC 844 slide gate jerks or shudders along the track. The 844’s chain drive is dependable, but the V-groove guide wheels on the gate itself wear unevenly, especially with Houston’s constant humidity and occasional silt from runoff. A worn wheel makes the gate ride rough, which the operator reads as an obstruction. We replace the wheel set, clean the track, and reset the operator’s obstruction sensitivity so the gate runs true again.
• FAAC keypad or intercom keys work intermittently after rain. FAAC’s weather seals are decent, but a hard Houston downpour can push water into the keypad enclosure if the gasket has aged or been knocked loose by a mower or trimmer. We open the enclosure, dry and clean the contacts, replace the gasket, and re-seal the edges with proper outdoor-rated sealant. If moisture already reached the board, we swap the keypad and test all functions.
• FAAC operator hums but the gate doesn’t move. On older FAAC 750 models, a humming motor with no movement usually means the motor’s capacitor has failed, or the worm gear inside the operator has stripped. We bench-test the capacitor first (a $40 part), then inspect the gear. If the gear is shot, we’ll give you a straight number on a rebuilt unit versus a new operator before any work is approved.

Our FAAC Electric Gate Repair Process

When you call (325) 378-0676, here’s how a FAAC repair goes from first ring to working gate:

1. 1
   You describe the symptom, we give you a range. Tell us what the gate is doing or not doing, and we’ll give you a realistic dollar range over the phone, not a vague “we’ll see when we get there.” Dean Prescott’s standing rule: “Tell me what the gate is doing – or not doing – and I’ll give you a real number before I ever touch a wrench.”
2. 2
   We arrive with FAAC parts already on the truck. Our techs carry common FAAC control boards, capacitors, limit switches, and safety sensor components. Houston traffic is bad enough without us having to run back across town for a part.
3. 3
   We diagnose in place and write the price. The tech tests the operator, the accessories, and the mechanical components. The written price comes before any work starts, and it doesn’t change unless we find something structural that you approve first.
4. 4
   We repair using OEM or proven aftermarket parts. For control boards and safety devices we lean OEM, because FAAC’s systems talk to each other in specific ways. For mechanical parts like wheels and hinges, a quality aftermarket part often lasts longer in Houston’s humidity than the original.
5. 5
   We test the full cycle, not just the fix. The gate runs through open, close, obstruction reversal, remote, keypad, and safety sensor functions. Then we clean the work area and walk the site with you.
6. 6
   You get the written guarantee. Every repair invoice carries the 365-Day Done Right Promise in writing. If the repair fails within that year, we come back and fix it at no charge.

What FAAC Electric Gate Repair Costs in Houston

Here’s what we typically see on FAAC jobs in the Houston area, parts and labor included:

• Control board replacement: $220 to $480, depending on whether it’s a 400 series board or a newer 844 board
• Limit switch replacement or adjustment: $140 to $220
• Safety sensor or photo eye replacement: $160 to $260 per pair
• Capacitor replacement: $85 to $150
• Keypad replacement: $180 to $320
• V-groove wheel set replacement: $190 to $350
• Full operator swap (new FAAC unit): $1,400 to $2,600, depending on model and access

What moves the price? The model of FAAC operator, how easy the access is, whether we’re replacing one part or several, and whether the mechanical components (hinges, wheels, track) need attention beyond the electronic repair. You’ll always know the total before we start. Estimates are free, and there’s no charge for the call.

Why Houston Homeowners Call Portcullis Gate Repair Houston for FAAC Work

We’re an independent FAAC service provider, not a manufacturer-authorized dealer, which means we answer only to you, not to a corporate warranty department. We’ve been running Portcullis Gate Repair Houston as a Kingswell company since 2008, and every job carries the Kingswell Guarantee in writing: a written price before any work starts, a real arrival window we actually keep, a clean job site when we leave, and a written guarantee on the repair. If a FAAC repair fails within 365 days, we come back and make it right at no charge. No arguing, no pro-rating, no disappearing act. Our techs also carry training on LiftMaster, Mighty Mule, Ghost Controls, and DoorKing systems, because plenty of Houston properties run more than one brand on different entrances.

FAQs