Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateFast, Reliable Electric Gate Repair Across Dickinson
Electric gate repair in Dickinson usually runs $160 to $780 depending on what failed, and most calls we handle are back up and running same day or next morning. We know Dickinson’s streets, from the gated entrances off FM 517 to the older bayou-side lots off Hughes Road, and we know what the salt air does to gate hardware faster than any inland suburb. If your gate won’t open, drags on one side, or the keypad just died, call (325) 378-0676 and a live person picks up, day or night.
Why Portcullis Gate Repair Houston Is Dickinson’s Preferred Electric Gate Repair Company
Portcullis Gate Repair has worked as a Kingswell company since 2008, and our Houston office dispatches background-checked, uniformed technicians to Dickinson every week. What Dickinson homeowners tend to say after we leave: the price was on paper before the first bolt came off, the tech showed up inside the arrival window, and the work is backed by a written 365-Day Done Right Promise. Not a verbal “trust us.” A guarantee stamped on the invoice. If a repair fails inside 365 days, we come back and fix it at no charge.
The reason our Electric Gate Repair team knows what to look for in Dickinson is simple: we have traced the same failures across Bay Colony, along Dickinson Bayou, and through the ranch-style neighborhoods off 45. Salt corrosion on operator boards. Galvanized hinge posts rusting through at the base. Storm debris bending slide gate racks. When you call, you are not explaining your gate system from scratch. We ask the right questions the first time.
Styles & brands we work with
Automatic Gate Repair in Dickinson
Automatic Gate Repair in Dickinson means getting the motorized opener, safety sensors, and control board talking to each other again after the coastal environment works them over. A Dickinson homeowner needs this service when the gate stops responding to remotes and keypads, reverses for no reason, or throws an error code on the operator. Most automatic gate repairs in Dickinson run $180 to $520 parts and labor, depending on whether we are replacing a sensor, rewiring a corroded connection, or swapping a failed control board.
Keypad and Remote Failures
Keypads mounted on brick columns off Bay Colony or Chester Road live in direct salt spray during wet months. We replace keypad faces, clean the contact points, and reprogram remotes. A keypad swap in Dickinson typically runs $95 to $185, and a new remote programmed on site usually runs $45 to $90.
Safety Sensor and Loop Issues
Safety sensors get knocked out of alignment by wind shift or caked with salt and road film. When the gate will not close, it is often a sensor that can no longer see its reflector. Re-aligning and cleaning sensors runs $80 to $140; replacing a corroded sensor pair and wiring runs $190 to $310.
Electric Gate Motor in Dickinson
Electric Gate Motor repair in Dickinson is the most common serious call we get, because the motorized operator is what actually moves the gate leaf, and Dickinson’s salt air shortens its life compared to inland Houston. Homeowners call when the motor hums but the gate will not move, when the gate opens halfway and stops, or when the operator makes a grinding sound. Motor repair in Dickinson typically runs $260 to $680, and a full swing gate actuator replacement, parts and labor, usually lands between $380 and $780 depending on the brand and gate weight.
Actuator Swaps on Swing Gates
The actuator is the motorized arm that physically pushes the gate open. On Dickinson’s sandier, shifting soils, a failing actuator often goes hand in hand with a hinge post that has sunk or tilted. We check both before writing the quote, so you know whether it is a straight motor swap or motor plus post work.
Battery Backup for Power Outages
Frequent power outages during hurricane season strand automated gates in the closed or open position. We install and wire battery backup systems on LiftMaster and FAAC operators so the gate still cycles when the grid is down. A battery backup install on an existing operator in Dickinson typically runs $240 to $420.
Trusted Brands We Service in Dickinson
Our technicians carry parts for the brands we see most across Dickinson: LiftMaster, FAAC, and Linear, along with BFT on some commercial gates. We stock common circuit boards, remotes, safety sensors, and battery backup kits locally, which is why we can often turn a same-week repair around in one visit. When a LiftMaster operator on a Bay Colony driveway fails, the tech arriving already knows that specific system, because our team trains on nine major gate-operator brands and sees these exact models across Galveston County every week.
See the difference
Before
After
Before
After
Before
AfterCommon Electric Gate Repair Problems We See in Dickinson Homes
- Corroded operator boards. Salt air works its way into the control board housing and eats the solder joints. The gate works intermittently, then not at all. We replace the board and seal the housing rather than just swapping the part.
- Rusted hinge posts. Galvanized posts rust through at the base where salty groundwater collects, especially on older ranch homes on pier-and-beam slabs. The gate sags, drags, and eventually will not latch. We replace the post footing and switch to stainless hardware.
- Storm-shifted slide gate racks. High winds and debris force slide gates off their rack and pinion tracks. The rack bends or the drive gear strips. We can often replace the rack section and gear rather than the whole gate.
- Keypad and intercom corrosion. Keypads facing the bay breeze corrode faster than any other exposed part. Buttons stop responding, the housing fills with moisture, and the gate will not open from outside. Replacement keypads get sealed and dielectric-greased on the terminals.
Pricing for Electric Gate Repair in Dickinson, TX
Electric gate repair in Dickinson runs from about $95 for a remote or keypad repair to $780 for a full swing gate actuator swap with stainless hardware. In between, expect $180 to $310 for safety sensor replacements, $190 to $310 for rewiring corroded connections, and $240 to $420 for battery backup installation. What moves the number is parts availability, gate weight, and whether the post is involved. Every quote is written down before work starts, and the price we write is the price you pay. Call (325) 378-0676 for a free estimate, and we will put the number on paper before a single bolt comes off.
We Also Serve Cities Near Dickinson
Our technicians serve all of Dickinson and the surrounding area, including Santa Fe, League City, Seabrook, and Friendswood. If you are a few miles outside Dickinson proper, call us anyway. Crews are scheduled from the Houston office and dispatch to Dickinson daily, so we can usually get to a neighboring city inside the same window we would quote for Dickinson itself.
Serving Dickinson, TX - Our Local Coverage Area
We’re based in the Dickinson area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Electric Gate Repair in Dickinson
Dickinson sits close enough to Galveston Bay that salt air settles on circuit boards, wiring terminals, and limit switches continuously, corroding contact points years faster than inland. Add storm-driven moisture and sandy, shifting soil under the posts, and the operator has to work harder to move a gate that is slightly out of alignment. The combination wears out boards and motors faster. The fix is sealing electronics, cleaning and greasing terminals, and making sure the posts are actually stable. Call (325) 378-0676 for an inspection and a written quote.
In most Dickinson cases, it is just the hinge post. Salt groundwater and storm surge rot galvanized posts through at the base, and the sandy clay soil lets the post lean. We dig out the old footing, pour a deeper concrete base, and re-hang the gate with stainless steel hinges. The gate leaf itself is usually still sound. You only need a new gate when the leaf itself is rusted through or structurally cracked. Call (325) 378-0676 and we will tell you which one it is.
Stainless steel, specifically 304 or 316 grade, is what actually holds up near the bayou. Galvanized steel rusts through at the base within a decade in Dickinson’s salt air and groundwater. We install stainless hinge pins, hinge bodies, brackets, and fasteners on every coastal swing gate we touch. It costs more up front, roughly 20 to 35 percent over basic galvanized parts, but it does not need replacing again in a few years. That is the specification we write on the quote, so you know exactly what you are paying for.
Yes. Most LiftMaster slide gate operators accept a battery backup kit, and we install and wire it to the main board so the gate cycles during Dickinson’s frequent storm-related power outages. The kit and labor typically run $240 to $420. We also service FAAC and Linear operators that already have battery trays and need new batteries. Call (325) 378-0676 and we will confirm your operator model before the truck rolls.
Usually just the rack and pinion. Storm winds push the gate leaf sideways, bending the rack strip or shattering the pinion gear. We replace the damaged rack section, straighten the track, and re-mount the gate to roll clean. You only need a full gate replacement if the gate leaf itself is bent or twisted beyond repair. Call (325) 378-0676 for a free assessment and a written price before any work starts.
When your electric gate is down in Dickinson, you want someone who answers, shows up, and writes the price down before touching anything. That is how Portcullis Gate Repair Houston works, every job, through the Kingswell Guarantee. Dean Prescott leads our team, and he holds every technician to the same four promises: a written price, a real arrival window, a clean job site, and a written guarantee. Call (325) 378-0676 for a free estimate, or reach us any hour, any day.
Written by Dean Prescott, Owner at Portcullis Gate Repair Houston, serving Dickinson since 2008.