Automatic Gate Repair in Houston, TX

Wrought iron

Wood & steel frame

Farm & ranch

Sliding driveway gates

LiftMaster operators

Every visit starts with

Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted

The assessment is free and the quote is the invoice.

Get your free estimate

Explore

Styles & brands we work with

01Wrought iron02Wood & steel frame03Farm & ranch04Sliding driveway gates05LiftMaster operators

Before & after

See the difference

Recent ProjectFull RestorationComplete Upgrade

BeforeAfter

BeforeAfter

BeforeAfter

Automatic Gate Repair in Houston, TX

Automatic gate repair in Houston typically costs between $200 and $700, depending on whether the issue is a sensor, a control board, an actuator, or a full operator replacement. Most repairs take a single visit, and we carry parts for LiftMaster, FAAC, and BFT systems on our trucks so we’re not sending you back to a parts warehouse. If your gate won’t open, won’t close, or reverses mid-cycle, call Gate Repair in Houston at (325) 378-0676 and a live person picks up, day or night.

We’re Portcullis Gate Repair Houston, an independently owned Kingswell company that’s been fixing automatic gates here since 2008. Dean Prescott runs this shop. The work we do on your gate operator, safety sensors, and swing arms holds to the same four Kingswell Guarantee promises: a written price before any work starts, a real arrival window, a clean job site, and a written guarantee on the repair. The home page explains the company background; this page is about what happens when your automatic gate stops doing its job.

When You Need Automatic Gate Repair

Houston heat, humidity, and the occasional coastal storm beat on automatic gate systems year round. Galvanized steel rusts faster near the ship channel, control boards cook inside operator boxes that sit in direct afternoon sun, and sensors get knocked out of alignment-our Gate Realignment service-when a delivery truck clips the gate track. Here’s what we see most often across neighborhoods like Meyerland, Kingwood, The Woodlands, and Clear Lake:

• The gate won’t open or won’t close. This usually points to a failed control board, a dead capacitor, or a broken limit switch. If you hear a hum but nothing moves, the capacitor is the likely culprit.
• The gate reverses before it finishes closing. Safety sensors, also called photo eyes, are misaligned or blocked. In Houston’s humidity, condensation inside the sensor housing is a common trigger.
• The gate moves slowly or jerks. The actuator, the motorized arm that physically pushes the gate open, may be losing torque. Swing gates in neighborhoods with heavy clay soil, like Cypress or Katy, also strain when gate posts shift and bind the hinge line.
• The operator runs but the gate doesn’t move. The drive chain or belt has slipped, or the gear inside the operator has stripped. We see stripped gears often on older operators that were never lubricated.
• The keypad or remote stopped working. Sometimes it’s the receiver board, sometimes the keypad’s internal battery, sometimes a failed transformer. We bench-test the operator electronics before replacing anything.
• The gate bangs open or slams shut. Worn hydraulic or mechanical stops are failing, and that force will eventually crack a weld or snap a hinge. This is a repair that pays for itself fast.

If any of that sounds familiar, call (325) 378-0676. We’ll ask a few questions, give you a straight answer about what we suspect, and schedule a visit with a real arrival window.

Our Automatic Gate Repair Process

We follow the same five-step process on every Gate Repair services job, whether it’s a swing gate in River Oaks or a slide gate at an industrial yard off the Beltway. It’s the Kingswell Way, and it’s why we put everything in writing.

1. You call, a person answers. No voicemail tree. We ask what the gate is doing, what brand of operator you have if you know it, and whether the gate is stuck open or shut. That determines urgency.
2. A uniformed, background-checked technician arrives in the window we gave you. You’ll know the tech’s name before the truck pulls in. We service nine gate-operator brands, including LiftMaster, FAAC, BFT, and Linear, so the person arriving already knows your system.
3. We diagnose and then hand you a written price. Before a single bolt is turned, you see the parts cost, the labor cost, and the total. If we find something else while working, we stop and call you with a new written price. No surprises at the door.
4. We repair, test, and clean up. The technician cycles the gate at least a dozen times, checks the safety sensors and force settings, and leaves the operator area cleaner than we found it. That’s the Kingswell standard.
5. You get a written Kingswell Guarantee on the invoice. Every repair carries the 365-Day Done Right Promise. If the same repair fails within 365 days, we return and fix it at no charge.

Automatic Gate Repair Pricing in Houston

What you’ll pay in Houston depends on what failed, what brand of operator you have, and whether the gate is swing or slide-here’s How Much Does Gate Repair Cost? (2026 Price Guide) - Houston, TX. Here’s what we typically see:

What moves the number within those ranges:

• Operator brand and age. A LiftMaster or FAAC control board usually costs more than a generic aftermarket board, but it fits correctly and lasts longer. Older operators sometimes have obsolete boards, which means we recommend an operator swap instead of a board swap.
• Gate type and weight. Slide gates and heavy wrought-iron swing gates need more torque. A lightweight driveway gate in Pearland costs less to service than a steel estate gate in Memorial.
• Access and site conditions. If the operator box is rusted shut or mounted in a flowerbed behind a shed, the labor goes up slightly. We tell you that before we start.
• Time of day. We answer live 24/7, and a 2 a.m. emergency call in The Heights doesn’t cost more just because it’s late. Our pricing is the same day or night.

Every estimate is free, and every price is in writing before work begins. Call (325) 378-0676 for an exact quote on your gate.

Why Houston Homeowners Call Portcullis for Automatic Gate Repair

Houston is a city with a lot of gate companies and not a lot of gate companies that answer the phone. We’ve heard the same stories for 17 years: the tech no-shows, the price doubles once the gate is disassembled, the repair fails six weeks later and nobody calls back. That’s not how Gate Repair in Houston works at Portcullis.

Here’s what we actually do:

• Written price first. The price you approve is the price you pay. If the job scope changes, we get your approval on a new written price before touching anything else.
• 365-Day Done Right Promise. The guarantee is stamped on the invoice. If our repair fails within a year, the return visit is free. Not prorated, not argued about, not scheduled three weeks out.
• Live person, 24/7. Every call, including holidays, is answered by a human being. If your gate is stuck open at midnight, a real person picks up.
• Background-checked, uniformed technicians. You’ll know exactly who’s coming, and they’ll know your operator brand before they arrive.
• Independently owned, Kingswell held. Every Portcullis location is independently owned and operated, which means the same Kingswell Guarantee applies: written price, real arrival window, clean job site, written guarantee on every repair.

Dean Prescott has been running Portcullis Gate Repair Houston since 2008. The techs on his trucks have worked on operators across the city, from the older swing gates in Bellaire to modern slide operators at commercial lots along 290. That experience shows up in faster diagnoses and fewer come-backs.

FAQs – Automatic Gate Repair

How much does automatic gate repair cost in Houston?

Most automatic gate repairs in Houston run between $200 and $700, with simple sensor fixes at the low end and control board or actuator replacements at the high end. For local pricing details, see How Much Does Gate Repair Cost in Houston, TX? (2026 Price Guide). Full operator replacement can run $900 to $2,400. Call (325) 378-0676 for a free estimate with a written price before any work starts.

Can Portcullis repair my LiftMaster or FAAC gate operator?

Yes, we service LiftMaster, FAAC, BFT, and Linear operators, along with five additional gate-operator brands. Our techs carry common boards, capacitors, sensors, and remotes for these brands on the truck, so most repairs finish same day.

Is it cheaper to repair or replace my automatic gate operator?

If the operator is under 10 years old and the failure is in a replaceable part like a capacitor, sensor, or limit switch, repair is usually the better move. If the control board is obsolete or the gear train is worn and the operator is over 12 to 15 years old, replacement often costs less long term. We’ll show you both options with written pricing and let you decide.

Can you come out the same day if my gate is stuck open?

Yes. Calls are answered by a live person 24/7, and we prioritize stuck-open or stuck-shut gates because those are security problems. Call (325) 378-0676 and we’ll give you a real arrival window, not a vague “sometime this week.”

What is the Kingswell Guarantee on automatic gate repairs?

The Kingswell Guarantee is a written guarantee on every repair: a written price before any work starts, a real arrival window, a clean job site, and a written repair guarantee. If the repair fails within 365 days, we return and fix it at no charge under the 365-Day Done Right Promise.

Schedule Automatic Gate Repair in Houston

If your automatic gate is acting up, don’t wait for it to fail completely at the worst possible time. A gate that works intermittently is a gate that’s about to strand you outside your own driveway or leave your property wide open. Call (325) 378-0676 now. We’ll answer, we’ll ask the right questions, and we’ll show up in the window we give you with a written price in hand before we turn a single bolt.

Written by Dean Prescott, Owner at Portcullis Gate Repair Houston, serving Houston.