Ghost Controls Electric Gate Repair Nationwide

Ghost Controls Electric Gate Repair in Houston: What to Know First

Ghost Controls electric gate repair in Houston is work we handle regularly, and most jobs are diagnosed and fixed in a single visit. You’ll get a written price before we touch a bolt, so you know the number going in. If you own a Ghost Controls swing or slide gate and it’s acting up, call us at (325) 378-0676 and we’ll talk through what’s happening.

Call (325) 378-0676

This page is for Houston homeowners with a Ghost Controls opener that won’t respond, a gate that stops mid-travel, or a keypad that quit working after a storm. We’re an independent Ghost Controls service provider, not a factory warranty center, which means we make parts and repair decisions based on what gets your gate working reliably, not what the manufacturer’s script says. But we know these systems well enough to diagnose them quickly and fix them properly the first time.

How Ghost Controls Products Fail – and How We Fix Them

Ghost Controls builds residential swing and slide gate operators. In Houston, the failure patterns are predictable, and most have straightforward fixes:

• Arm actuator motor burnout on the AXS Series. The AXS series uses a 12V DC motor inside the articulating arm, and in Houston’s heat, the motor brushes wear faster than Ghost Controls’ published service life suggests. You’ll hear the arm click but the gate won’t move, or it’ll move a few inches and stop. We replace the actuator motor or the full arm assembly, depending on what’s still good inside.
• Control board damage after thunderstorms. Houston’s storm season sends power surges through gate wiring, and Ghost Controls boards are more sensitive than most. If your remote stopped working after a lightning storm but the gate still opens from the keypad, the board’s receiver likely took the hit. We test the board before swapping it so you’re not paying for a new one when the old one still works.
• Limit switch drift on the older BP Series. The BP series used mechanical limit switches that creep out of adjustment over time. The gate starts slamming into the post instead of stopping gently, or stops six inches short of closed. When we see this in Houston, it’s usually because the gate itself has settled or shifted in the clay soil, which throws the mechanical limits off. We reset the limits and check the gate’s travel path before calling it done.
• Photo eye misalignment on slide gates. The safety eyes get bumped by lawn equipment or knocked out of alignment by shifting gate columns. The gate reverses halfway or refuses to close. We realign the eyes and harden the mounting so they stay put. This is a quick fix, but if you ignore it, the gate will eventually refuse to move at all, and now you’re dealing with a safety lockout.
• Battery backup failure on the TSS1 solar-capable systems. Houston homeowners who run Ghost Controls off solar or with battery backup find the batteries lose capacity in the heat. A fully charged battery that dies after two cycles is a battery problem, not a board problem. We test the batteries and replace only what’s actually failing.

Our Ghost Controls Electric Gate Repair Process

When you call, here’s the sequence, from the first ring to the gate cycling correctly:

1. 1
   You talk to a live person. No voicemail tree. You describe what the gate is doing or not doing, and we ask the questions that matter: When did it start? Does the keypad work? Is the manual release engaged?
2. 2
   We arrive in the window we gave you. A uniformed, background-checked technician shows up with common Ghost Controls parts on the truck, saved time because the diagnosis started on the phone.
3. 3
   We diagnose on site. We check the actuator movement, the control board response, the safety inputs, and the power supply. We explain what we find in plain English and show you the failed part when we can.
4. 4
   We give you a written price. You decide whether to proceed. The price covers parts, labor, and cleanup, and it’s the number you pay. No surprises after the fact.
5. 5
   We make the repair and test it. The gate gets cycled multiple times, the safety edges and photo eyes get verified, and the limits get set correctly for how the gate actually travels.
6. 6
   We leave the written guarantee. Every Ghost Controls repair we do carries the 365-Day Done Right Promise. If the repair fails inside that year, we come back and fix it at no charge. That’s written on the invoice, not just said in the driveway.

What Ghost Controls Electric Gate Repair Costs in Houston

Most Ghost Controls repairs in Houston run between $185 and $650. The low end covers simple fixes like photo eye realignment or keypad reprogramming. The higher end covers control board replacement or a full arm actuator swap on an AXS series. The cost driver is almost always the part, not the labor, and we’ll tell you before ordering anything whether OEM makes sense or whether a quality aftermarket part will do the same job for less.

A few reference points so you’re not guessing:

• Photo eye realignment or replacement: $185 – $275
• Keypad reprogramming or replacement: $145 – $240
• Control board replacement: $275 – $520 depending on series
• Arm actuator motor replacement on AXS: $350 – $650 parts and labor
• Battery backup replacement: $160 – $280

Every estimate is free. Call (325) 378-0676 and we’ll give you a ballpark over the phone before we even schedule the truck.

Why Houston Homeowners Call Portcullis Gate Repair Houston for Ghost Controls Work

We’re an independently owned Kingswell company, which means we’re held to four promises on every job: a written price before any work starts, a real arrival window, a clean job site when we leave, and a written guarantee on the repair. That’s not marketing language, it’s the Kingswell Guarantee, and our owner Dean Prescott signs off on it. He’s been working swing arms, slide tracks, and control boards for well over a decade, and his crew has put in steady work from Sugar Land driveways to the long fence lines out near the Energy Corridor. Dean is known for showing up with the right part already on the truck, and for giving customers a straight dollar range before a single bolt is touched. Tell us what the gate is doing, or not doing, and we’ll give you a real number before we ever touch a wrench.

And because we service LiftMaster, Mighty Mule, and DoorKing too, we’re not stuck recommending one brand. If a Ghost Controls board keeps failing because the wiring run is too long for a 12V system, we’ll tell you that honestly and help you decide what actually makes sense for your gate.

FAQs