Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGhost Controls Gate Repair in Houston: What to Know First
We repair Ghost Controls gate openers across Houston, and most jobs are done in a single visit. You’ll get a written price before we touch a single bolt, and every repair carries the 365-Day Done Right Promise in writing. If you’ve got a Ghost Controls gate that won’t open, won’t close, or beeps at you when it shouldn’t, call (325) 378-0676 and tell us what it’s doing. We’re an independent Ghost Controls service provider, not a factory warranty center, which means we can often get you running faster and more affordably than the manufacturer’s process allows.
This page is for Houston homeowners and property managers who own a Ghost Controls opener and need it fixed right the first time.
Key Takeaways
- Ghost Controls gates share common failure points: control boards, actuator arms, limit switches, and battery systems.
- Houston’s humidity and heat hard on Ghost Controls circuit boards and batteries, more than most climates.
- We fix Ghost Controls gates same-day in most cases, with a written price before work begins.
- Every repair is backed by a written 365-day guarantee, not a handshake.
Styles & brands we work with
How Ghost Controls Products Fail – and How We Fix Them
Ghost Controls builds swing gate actuators and opener kits. They are a popular choice for Houston driveways because they are affordable and relatively simple. But simple does not mean trouble-free. Here are the failure patterns we see most often on Ghost Controls gates in the Houston area.
- Control board failure on the RTE (remote transmitter electronics) models. Houston’s humidity gets into the board housing through micro-cracks in the seal, and corrosion starts on the relay contacts. The gate will start opening on its own at 3 a.m. or won’t respond to the remote at all. The fix is a board-level repair or replacement, depending on how far the corrosion has spread. We open the housing, show you what we found, and quote before we order anything.
- Actuator arm seizing on the Ghost Controls single-arm swing models. The actuator is the motorized arm that physically pushes the gate open. When water gets past the wiper seal, the internal lead screw rusts. The arm will move slower and slower until it won’t move at all. We’ve seen this on gates that were installed less than three years ago in Houston. We replace the actuator with an OEM unit when available, or a quality aftermarket unit that matches the stroke length. Some customers choose to upgrade to a heavier-duty arm at this point, and we walk them through the trade-off.
- Limit switch drift causing the gate to stop short or overtravel. Ghost Controls openers use magnetic limit switches that tell the opener when the gate has reached fully open or fully closed. Houston’s heat cycles expand and contract the gate leaf enough that these switches shift out of position. The gate will stop a foot short of closed, or slam hard against the post. Adjusting the limit switch is straightforward; the part itself rarely fails. The real problem is that the homeowner adjusts it wrong and makes it worse, so we do the adjustment and then run the gate through ten full cycles to confirm.
- Battery failure on Ghost Controls solar-ready and battery-backup models. Many Houston owners add a battery backup for hurricane season. The sealed lead-acid batteries Ghost Controls uses degrade faster in hot, humid climates than the manufacturer’s rating suggests. After two Houston summers, a battery that should last five years will hold a charge for twenty minutes. We test the battery under load, and if it’s failed, we replace it with a higher-rated deep-cycle battery. It costs a little more than the stock unit, but it survives Houston August.
- Receiver antenna corrosion on the GATE series remotes and keypads. The antenna wire inside the receiver box corrodes at the solder joint. The remote will work from ten feet away but not from the street. We’ve found this on Ghost Controls units installed near the coast in Houston, where salt air compounds the humidity problem. The repair is a small solder job and reseal, usually under a hundred dollars.
Our Ghost Controls Gate Repair Process
- 1
You call (325) 378-0676. A live person answers, day or night. You describe what the gate is doing – or not doing.
- 2
We give you a real arrival window. Not “sometime between 8 and 5.” We tell you when we’ll be there, and we show up within that window.
- 3
We diagnose the Ghost Controls system on-site. We test the control board, actuator, limit switches, and battery. We show you exactly what we found and explain it in plain English, not trade shorthand.
- 4
You get a written price before any work starts. Parts and labor, in writing, no surprises after we’ve taken your gate apart.
- 5
We fix it. We carry common Ghost Controls parts on the truck: control boards, actuators, limit switches, remotes, and battery replacements. If it’s a special-order part, we tell you the lead time and get you a temporary fix if one is possible.
- 6
We test the gate through at least ten full cycles. Then we clean up the work area and go over the written 365-Day Done Right Promise with you before we leave.
See the difference
Before
After
Before
After
Before
AfterWhat Ghost Controls Gate Repair Costs in Houston
Here are honest dollar ranges for the Ghost Controls jobs we handle most often in Houston. Prices include parts and labor, and you’ll always see the exact number in writing before we start.
| Repair Type | Typical Cost Range |
|---|---|
| Limit switch adjustment | $95 – $180 |
| Receiver antenna repair | $120 – $250 |
| Control board replacement | $350 – $650 |
| Actuator arm swap (single arm) | $450 – $800 |
| Battery replacement (backup or solar) | $180 – $350 |
| Full opener kit replacement (both arms + board) | $1,100 – $2,200 |
What moves the price: gate weight, gate condition, how much corrosion has set in, and whether the posts or hinges need work alongside the opener. Our estimate is free, no matter what you decide. Call (325) 378-0676 and we’ll give you a range before we ever schedule the truck.
Why Houston Homeowners Call Portcullis Gate Repair Houston for Ghost Controls Work
Portcullis Gate Repair Houston has been operating as a Kingswell company since 2008. Dean Prescott has been working gates for over a decade, and his crew has put in steady work across Houston – from Sugar Land driveways to the long fence lines out near the Energy Corridor. We service Ghost Controls openers every week, but we also work on LiftMaster, Mighty Mule, DoorKing, FAAC, BFT, Linear, Viking, and Elite. That matters when a Ghost Controls part is on backorder and the gate needs to work today; we can often substitute a comparable part from another brand and get your gate moving.
Every job carries a written price before work begins, a real arrival window, a clean job site, and a written guarantee – the Kingswell Guarantee, same standard at every Kingswell location. If the repair fails within 365 days, we come back and fix it at no charge. That’s not a promise. That’s the invoice. You can call us at (325) 378-0676 for a free estimate. A live person answers, 24 hours a day, even on holidays.
FAQs
No, not with us. Portcullis Gate Repair Houston is an independent Ghost Controls service provider, and having a third party service your opener does not automatically void your manufacturer warranty. We use OEM parts when we can and document what we did for every job. If your Ghost Controls unit is still under manufacturer warranty, we’ll tell you honestly whether the failure is something the manufacturer might cover, and we’ll help you file that claim if it makes sense.
In most cases, yes. We carry common Ghost Controls parts – control boards, actuators, limit switches, remotes, and batteries – on the truck. Call (325) 378-0676 and tell us what the gate is doing, and we’ll tell you whether it’s a same-day fix or a parts-order situation. If it’s a parts-order job, we’ll tell you the lead time before you commit to anything.
If the repair is under about 60 percent of the cost of a new opener kit, repairing makes sense. If the gate is old, the posts are shifting, and the actuator arm is rusted through, a new opener kit is often the better money. We’ll run the numbers with you in plain English. As Dean Prescott puts it: “Tell me what the gate is doing – or not doing – and I’ll give you a real number before I ever touch a wrench.”
Yes. We handle Ghost Controls solar-ready and battery-backup systems. Houston’s heat and humidity are brutal on the sealed lead-acid batteries these units use, and we often replace them with higher-rated deep-cycle batteries that hold up better through the summer. Call (325) 378-0676 to talk through what your solar system is doing – or not doing.
Most common Ghost Controls parts arrive the next business day if they’re not already on our truck. Special-order parts – a specific actuator stroke length, a less-common control board revision – can take three to five business days. We’ll tell you the exact lead time when you call, before you spend a dollar.
Contact Us
If you own a Ghost Controls gate in Houston and it’s not working right, call Portcullis Gate Repair Houston at (325) 378-0676. We’ll answer, we’ll listen, and we’ll give you a free estimate with a real price range before we ever send a truck. That’s the Kingswell Way: say the price before the work, show up in the window we gave you, leave the place cleaner than we found it, put the guarantee in writing, and come back if it fails. We’ve been doing it that way since 2008.
Written by Dean Prescott, Owner, Portcullis Gate Repair Houston at Portcullis Gate Repair Houston, serving Houston and nearby areas.