Linear Gate Installation Nationwide

Linear Gate Installation in Houston: What to Know First

Linear gate installation in Houston typically runs $1,850 to $4,600 for a complete residential swing or slide gate setup, including the operator, mounting hardware, and labor. Most single-operator Linear jobs take one full day on site, and we quote the full price in writing before any work starts. If you already own a Linear operator or need one sourced, we install it independently, with no manufacturer tie holding us to a script.

Call (325) 378-0676

This page is for Houston homeowners who have a Linear operator on the way, a Linear system half-installed, or a gate that outlived its first operator and needs a clean start. As an independent Linear service provider, we work on what’s in front of us and tell you the truth about it. Call (325) 378-0676 and you’ll get Dean or a member of the crew on the line, not a call center queue.

How Linear Products Fail – and How We Fix Them

Linear operators are common across Houston, from gated communities in Sugar Land to standalone driveways in the Heights. The brand has been through multiple ownership changes over the years, which means the Linear system on one driveway can be a completely different generation from the Linear system two streets over. That matters when it’s time to install or replace. Here’s what we see most often on Linear jobs in Houston:

• Linear LRA and M-series swing arms that stall mid-travel in the summer. Houston heat plus a heavy gate can push the actuator’s thermal cutoff to trip, which looks like a dead operator but is actually the motor protecting itself. The fix starts with checking the gate’s weight and hinge alignment before condemning the operator. A gate that swings hard against bad hinges makes any operator work twice as hard, and Linear motors run hot under load.
• Linear APeX series control boards with dead relay channels. The APeX line (common on slide gates) uses onboard relays for accessory functions like lock activation and safety loops. A lightning strike or a short from a compromised photo eye will kill one relay channel while the rest of the board still tests fine. That’s why a Linear system can run the gate but refuse to release a magnetic lock. We bench-test the board before replacing it, because a new APeX board is real money and the old one often has life left in the other channels.
• Linear Megacode remotes that stop being recognized after a power surge. The receiver boards on older Linear gate systems sometimes lose their learned codes after the power blinks out during a storm. The homeowner presses the remote, gets nothing, and assumes the operator is dead. In a lot of cases, the operator is fine and the receiver just needs reprogramming or a replacement radio module. We carry both OEM and compatible replacement receivers, and we’ll tell you the price difference before ordering anything.
• Linear LDO series slide operators with stripped drive gears on long runs. Long driveway slide gates in Houston’s clay-heavy soil move out of level over time. When a slide gate drops even half an inch, the drive gear on an LDO operator takes the hit. By the time the gate starts grinding or refusing to move, the gear teeth are usually worn down to nubs. We replace the gear and then address the track or wheel issue that caused the wear, because a new gear on an unlevel track fails the same way in a year.
• Linear branded photo eyes that are actually universal sensors with new wiring. This is the one that catches people. Some Linear systems shipped with photo eyes that are just rebadged generic sensors. The OEM replacement from a Linear dealer costs triple what the functionally identical aftermarket part costs. We’ll show you both options, explain the warranty difference, and let you decide. We don’t mark up parts as a profit center; we charge for the install and stand behind the work for 365 days.

Our Linear Gate Installation Process

Every Linear job follows the same sequence, whether it’s a new install or a repair on an existing system. The Kingswell Way means you know the price before the wrench turns, and you know who’s showing up before the truck parks.

1. 1
   You call, a person answers. Dean or one of the crew picks up at (325) 378-0676. You tell us what the gate is doing, or not doing, and we’ll give you a real number before we ever touch a wrench. That’s the way it’s always been.
2. 2
   We look before we quote. A site visit, a look at the gate’s weight, the hinge posts, the electrical run, and the existing operator if there is one. We don’t quote blind over the phone on installs; we quote accurately on site.
3. 3
   Written price, agreed before work starts. The quote covers parts, labor, and the cleanup. No surprise line items, no “well, we had to replace the X too.” If we find something that changes the scope, we stop and talk first.
4. 4
   Installation day. Uniformed, background-checked technicians arrive in the window we gave you. We mount, wire, program limits and safety edges, sync remotes, and run full cycle tests. The work site is cleaner when we leave than when we got there.
5. 5
   Test cycles and the walkthrough. We run the gate through multiple cycles, show you how to operate and release it manually, and hand you the written Kingswell Guarantee on the repair or install.
6. 6
   365-Day Done Right Promise. If anything fails within the guarantee period, we come back at no charge. Written on the invoice, stamped, and honored.

What Linear Gate Installation Costs in Houston

We give real price ranges because that’s the only useful answer to “what does it cost.” In Houston, a single swing gate with a new Linear LRA-series actuator typically runs $1,850 to $2,900 including parts, mounting hardware, and full installation. A slide gate on a Linear LDO or APeX operator falls between $2,400 and $3,800 depending on track length, power availability, and gate weight. A full replacement that includes new gate fabrication, a new operator, safety loops, and photo eyes can reach $4,600 or more. What moves the price: gate weight, hinge condition, power distance from the house, and whether we’re building from scratch or swapping onto existing posts. Every quote is written and agreed before any work begins.

For an exact number on your gate, call (325) 378-0676 for a free estimate.

Why Houston Homeowners Call Portcullis Gate Repair Houston for Linear Work

Portcullis Gate Repair Houston is an independently owned Kingswell company, and we’ve been doing this since 2008. That Kingswell part isn’t a franchise slogan. It’s a written set of commitments: a written price before any work starts, a real arrival window, a clean job site when we pull out, and a written guarantee on every repair. Our 365-Day Done Right Promise means if the fix we make fails inside a year, we come back and make it right at no charge. Background-checked, uniformed technicians arrive in the window we committed to, and a live person answers the phone 24/7, holidays included. We service nine major operator brands, so when a Linear system turns out to have a LiftMaster control board or a Mighty Mule photo eye wired in, the tech in your driveway already knows the system. Dean Prescott has been working gates for well over a decade, and his crew has put in steady work across Houston, from Sugar Land driveways to the long fence lines out near the Energy Corridor. The point isn’t to be everything to everyone. It’s to be the company that shows up, fixes it right, and puts the guarantee in writing.

FAQs