Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGate Company in Dickinson, TX
Gate repair in Dickinson means working with salt air, shifting soil, and storm-force winds off Galveston Bay. Most of the repair work we do here falls into two camps: automated driveway gates whose electronics and hardware corrode faster than inland systems, and older wooden or iron gates whose posts have moved in the sandy, clay-like Gulf Coast ground. Whether it’s a gate off its track after a named storm or an operator that stopped responding, we show up with a written price before any work starts. Call (325) 378-0676 and a live person answers, any hour.
Why Dickinson Homes Are Different
Dickinson’s housing stock splits roughly in two. The older neighborhoods, especially around Dickinson Bayou, are full of 1970s to 1990s ranch-style homes on pier-and-beam or slab foundations. The gate posts there sit in soil that shifts seasonally, and the wood privacy fences and gates common along the bayou take a beating every hurricane season. We routinely find posts leaning two or three inches out of plumb, hinges stressed to the point of tearing, and gates that won’t latch because the whole assembly has settled.
The newer subdivisions, Bay Colony being the one we visit most, have ornamental iron and aluminum driveway gates with automation. Those look clean, but the internals corrode quickly in Dickinson’s humid, salt-heavy air. Circuit boards, limit switches, and battery leads in an automated gate operator age here in five years at the same rate they’d age in fifteen somewhere inland. High winds compound it: a wind-loaded gate pushes back against the operator constantly, wearing out gears and straining motors. After any named storm, our call volume in Dickinson spikes with gates torn off their tracks, posts knocked out of alignment by surge and debris, and operators fried by power surges. We stock battery backup components for a reason.
Styles & brands we work with





Our Main Dickinson Services
In Dickinson, the two calls we take most often are repair jobs on gates that won’t open or close properly, and full replacements or new installations. Here’s what each involves on the ground here.
Gate Repair in Dickinson
Most repair calls in Dickinson start with a gate that won’t move, a post that’s leaning, or a latch that no longer lines up. In the older neighborhoods along Dickinson Bayou, we’re often digging out and resetting posts that have shifted in the sandy, clay soil. In the newer subdivisions, we’re more often replacing corroded hardware, rewiring operators, or swapping out a burned motor. Every repair starts with a diagnostic visit, a written price for the actual fix, and a written guarantee on the work.
See the full breakdown on our Gate Repair in Dickinson page.

Gate Installation in Dickinson
New gate installation in Dickinson means working with the local soil, the wind exposure, and the style of the home. We set posts deeper than code minimums when the ground is sandy, and we use heavier hinges and posts on anything that faces the prevailing bay winds. Whether it’s a wooden privacy gate on a pier-and-beam home near the bayou, or an ornamental iron driveway gate in a subdivision like Bay Colony, the process includes measuring the opening, quoting a written price, and building for Dickinson’s actual conditions.
Read what a full installation includes on our Gate Installation in Dickinson page.

Electric Gate Repair in Dickinson
Automated gates in Dickinson fail most often because of corrosion, power issues, or wind damage. The salty, humid air attacks circuit boards and connections inside the operator housing, and the frequent outages from storms demand battery backup systems that must be tested and replaced periodically. We diagnose the operator itself, the safety edges, the receiver, and the power run, then give a written price for the repair before any work begins.
The operator-specific details are on our Electric Gate Repair in Dickinson page.

What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service in Dickinson
We carry parts and service training for the gate operators Dickinson homeowners actually have installed. BFT, Linear, Viking, and Ghost Controls are the brands we see most often in this area, and we keep common components for those systems stocked locally so repairs aren’t waiting a week on a freight truck. If your operator is outside those four, see our brands page for the full list we service.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Company in Dickinson, TX
These are the line-item price ranges we quote most often for Dickinson work. The exact price depends on your gate’s size, weight, and condition, but you’ll have it in writing before we start.
| Service | Typical range in Dickinson |
|---|---|
| Diagnostic service call | $80 – $120, applied to the repair |
| Gate post reset (single post, wood or iron) | $240 – $500 |
| Hinge replacement (pair, heavy duty) | $220 – $400 |
| Gate wheel or roller replacement | $160 – $320 |
| Swing gate actuator swap | $800 – $1,400 parts and labor |
| Control board replacement (slide or swing operator) | $500 – $900 |
| Battery backup system install | $700 – $1,200 |
| Single driveway gate install (materials and labor) | $3,000 – $7,500 |
| Full gate system with operator and safety edges | $7,500 – $15,000 |
What pushes a Dickinson quote higher is the same thing that breaks gates here in the first place: corrosion. If a post is too far gone to reset, if the operator housing has become a salt-air science experiment, or if the gate needs heavier hardware to stand up to bay winds, the price reflects it. But you’ll see that price in writing before a single bolt is turned. No surprises at the door.
Neighborhoods We Serve in Dickinson
We run work across all of Dickinson, from the bayou-front properties on the older side to the outer subdivisions. Our typical response window in Dickinson is same day for urgent calls and within 48 hours for scheduled diagnostics and quotes.
- Bay Colony
- Neighborhoods along Dickinson Bayou
- Properties near FM 517 and I-45
- Subdivisions off FM 646
- Pine Drive and surrounding streets
Service Area – Cities Near Dickinson
If you’re just outside Dickinson, we likely cover you too. Our Dickinson crews also run routes into Santa Fe, TX, League City, TX, Seabrook, TX, and Friendswood, TX. Same written-price standard on every job, in every city.
Serving Dickinson, TX - Our Local Coverage Area
We’re based in the Dickinson area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Dickinson
For urgent issues like a gate stuck open or a vehicle trapped inside, we aim for same-day dispatch in Dickinson. For non-urgent diagnostics and quotes, we schedule within 48 hours. Call (325) 378-0676 and we’ll give you a real arrival window, not a four-hour guess.
Most residential gate replacements on existing posts don’t require a permit in Dickinson, but new driveway gates and any work involving a new power run often do. We’ll tell you during the quote whether your specific job needs anything filed with the city.
We serve all of Dickinson, from Bay Colony to the bayou-front neighborhoods. The older areas are a big part of our call volume here, and we quote the same written-price standard no matter which side of I-45 you’re on. Call (325) 378-0676 for a free estimate.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Dickinson Customers Say
"Gate wouldn't respond to the remote or the keypad. Turned out to be the control board. They had the part and swapped it the same visit. Quoted it first, no surprises."
- Everett Shaw"Our intercom and gate motor both quit. They fixed the whole system in one visit and explained the warranty clearly. On time, polite, and tidy. Can't ask for more."
- Yvette Marchetti"Electric gate kept doing its own thing, opening at random. The tech found a shorted sensor and a worn board, fixed both, and showed me the old parts. Price was what he quoted on the phone."
- Cassandra Pike