Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateFast, Reliable Gate Installation Across Manvel
Gate installation in Manvel is not a one-size-fits-all job, and if you live here, you already suspect that. Our crews work Sedona Lakes, Lakeland Heights, and the ranch roads off Highway 6 every week. We know the blackland prairie clay, the builder-grade operator shortcuts, and the difference between a gate that holds square for a decade and one that sags by spring. Call (325) 378-0676 and you will reach a live person who can quote a real number, not a callback queue.
Why Portcullis Gate Repair Houston Is Manvel’s Preferred Gate Installation Company
We have been a Kingswell company since 2008, and every Portcullis location is independently owned and operated but held to the same four Kingswell Guarantee promises: a written price before any work starts, a real arrival window, a clean job site, and a written guarantee on the repair. That is not a franchise slogan. It is stamped on every invoice. Dean Prescott runs our Houston operation, and when a Manvel homeowner calls about a sagging swing gate or a dead operator, the technician who shows up is background-checked, in uniform, and already knows the operator brand on the property before the truck stops.
We do not no-show and we do not inflate the price at the door. Our Gate Installation team has handled enough failed builder installs in Manvel to know exactly what the developer left behind, and what it takes to correct it. We answer the phone 24 hours a day, seven days a week, including holidays.
Styles & brands we work with
Driveway Gate Installation in Manvel
Driveway Gate Installation in Manvel usually means one of two things: replacing a gate the builder put in with an operator that was never up to the job, or adding automation to a manual gate the developer left plain. In both cases, the work starts with the ground under the gate, not the gate itself. Manvel’s expansive clay soil moves more in a wet spring than a Houston suburb lot does in five years, so we pour deeper footings and use concrete collars on the hinge posts as standard practice.
A typical single swing driveway gate in Manvel runs $2,400 to $4,800 installed, with the operator included. A double gate, which is common on the 1 to 5 acre lots off Croix Road and Del Bello Road, runs $4,200 to $8,500 depending on the material and operator you choose. Wrought iron and aluminum both hold up, but aluminum resists the humid subtropical rust better over a decade.
New Construction and Builder Replacements
Builders in newer Manvel subdivisions rarely install sealed conduit or drainage on the gate operator. The control board sits in a box at the post and after the first heavy rain, moisture wicks in and the gate quits. We replace the builder operator, seal the box properly, and run new conduit where the 14-gauge speaker wire the electrician left is not enough.
Manual Gate Automation
Lots of Manvel homes have a perfectly good manual gate the developer put in and never automated. Adding an opener means the gate has to be braced for the torque of a motor, not just the weight of a push. We add the safety photocell and loop detector the builder skipped, because a gate that closes on a car is a liability, not an inconvenience.
Sliding Gate Installation in Manvel
Sliding Gate Installation in Manvel is the right call when the driveway slopes or when you do not want to lose swing clearance into the yard. A slide gate rolls on a track instead of arcing inward, so it works on long driveways and on lots where the approach angle off Highway 6 or County Road 48 makes a swing gate impractical. We install slide gates on a rack and pinion system when the gate is heavy, because a chain drive on a 20-foot wrought iron gate will stretch and bind in a season.
A sliding driveway gate in Manvel typically runs $4,800 to $9,500 complete, including the operator, the track, and the safety edges. Cantilever slide gates, which many of the older ranch properties off Highway 288 still use, run higher because the gate frame itself must be engineered to carry the slide load without wheels. We weld and align those on-site, since most were hand-built and out of square by an inch or more.
Rack and Pinion Retrofits
When an older sliding gate was never meant to be automated, we convert it to a rack and pinion drive rather than bolting a motor to a gate that was not built for it. The builder’s manual slide gates in subdivisions like Lakeland Heights usually have no rack at all. We add the rack, the operator, and the exit loop in one visit.
Sensor and Safety Edges
Every sliding gate in Manvel needs safety edges and a photocell, full stop. A slide gate closing against a car or a kid is a crushing hazard, and we will not install an operator without sensing. We also add a loop detector for exit so the gate opens automatically when you leave, which is the part most homeowners do not know to ask for.
Trusted Brands We Service in Manvel
Our technicians are trained and certified on nine major gate-operator brands, including LiftMaster, FAAC, BFT, and Linear. That means when a Manvel homeowner calls about a dead LiftMaster operator on a Sedona Lakes driveway gate, the person we send already knows that board, that wiring, and that failure mode. We keep common parts and boards stocked for Manvel calls so we are not waiting on a distributor in Houston while your gate sits open. If you are replacing an operator as part of a new installation, we will quote the exact unit we are putting in, by name, in writing.
See the difference
Before
After
Before
After
Before
AfterCommon Gate Installation Problems We See in Manvel Homes
- Builder-grade operators without sealed conduit. Developers in Manvel typically install the cheapest operator that opens the gate on closing day, with no drainage and no seal on the control box. After the first heavy rain on blackland prairie soil, moisture wicks into the board and the gate fails. We replace the operator and fix the drainage so it does not happen again.
- Manual gates converted to automatic with no safety gear. A manual gate in an older Manvel ranch property or a Lakeland Heights subdivision lot gets an opener bolted on, but no photocell and no loop detector. The gate closes on a car, trips the breaker, or both. We add the sensors before the gate goes back into service.
- Shifting hinge posts on expansive clay. Manvel’s clay soil expands and contracts so aggressively with seasonal moisture that a standard 36-inch footing poured like a Houston suburb job will shift within two years. The swing gate sags and scrapes the driveway. We pour deeper footings and concrete collars so the post stays put.
- Undersized wiring from the house to the gate. Builders often run 14-gauge wire to the gate post because it is cheap and the house passed inspection. That wire cannot carry the current a modern operator draws on a long run, and the operator burns out the board or trips the breaker. We pull new conduit and proper wire before the operator is installed.
Pricing for Gate Installation in Manvel, TX
Here are the straight numbers. A swing gate in Manvel runs $2,400 to $4,800 for a single, $4,200 to $8,500 for a double. A sliding gate runs $4,800 to $9,500 complete. A pedestrian gate beside the driveway adds $900 to $2,200. The big variables are the gate material, the operator brand, and whether we are fixing a bad builder install or starting clean. You will get the price in writing before a single bolt is turned, and that price is what you pay. Call (325) 378-0676 for a free estimate on your specific gate.
We Also Serve Cities Near Manvel
Our crews serve the surrounding area the same way we serve Gate Installation in Manvel residents: with the same written pricing, the same trained technicians, and the same 365-Day Done Right Promise. We cover Fresno, Friendswood, Missouri City, and South Houston, so if you live just outside Manvel, the same team can handle the work.
Serving Manvel, TX - Our Local Coverage Area
We’re based in the Manvel area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Installation in Manvel
Because moisture gets into the control board. Builders in Manvel rarely install sealed conduit or drainage on the gate operator box, and the blackland prairie soil holds water right at the post base. The fix is a sealed enclosure, proper drainage, and a control board that is not sitting in a puddle. Call (325) 378-0676 and we will open the box and tell you what you have before you pay anything.
Yes, and we do it regularly. The catch is that the manual gate was never built for motor torque, so we have to brace the gate, add the rack or hinge reinforcement, and install the safety photocell and loop detector the developer skipped. It is a real installation, not a bolt-on kit, and it is billed as one.
Deeper than the Houston standard. Manvel’s blackland prairie clay expands and contracts so aggressively that a 36-inch footing can shift within two years. We typically pour footings below the active soil zone, often 48 inches or more, and add a concrete collar around the post. That is the difference between a gate that stays square and one that scrapes the driveway by the second spring.
A swing gate arcs inward and needs clear space to swing, while a slide gate rolls sideways along the fence line. For a 2-acre lot off Highway 6 with a long driveway and no clearance problem, a swing gate is usually less expensive. If the driveway slopes toward the road or you need to keep the interior clear, a slide gate is the better call. We will tell you which one fits your site and quote both in writing.
Yes, if you want the gate to open automatically when a car pulls up and close without you pressing a button. The loop detector is buried in the driveway and senses the vehicle. Builders skip it to save money, and then the gate closes on cars or you have to key in a code every time. We install loop detectors on every automatic gate we put in. Call (325) 378-0676 for a free estimate, and we will include the loop detector in the written price.
Written by Dean Prescott, Owner at Portcullis Gate Repair Houston, serving Manvel since 2008.