Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGate Company in Missouri City, TX
We’re Portcullis Gate Repair, the Missouri City gate company homeowners call when a driveway gate won’t open, sags on its hinges, or starts grinding at 6 a.m. Missouri City gates deal with a specific mix of problems: master-planned community HOA rules, long driveways with buried cable runs, and a humid Gulf Coast climate that rusts iron and fries control boards. Call (325) 378-0676 and you’ll get a live person, a written price before anything gets unbolted, and a repair covered in writing for a full year.
Why Missouri City Homes Are Different
Missouri City isn’t a single style of housing. It’s a patchwork of 1980s ranch homes, 1990s brick subdivisions, and newer master-planned communities like Sienna and Riverstone where ornamental iron driveway gates are nearly standard. That spread matters for gate work. A gate on a 1980s home off Turtle Creek Drive might have a chain-drive operator that’s been soaked by three decades of Houston humidity. A double-wide gate in Sienna, by contrast, often runs a battery-backup operator that gets hit by power surges every time a summer thunderstorm rolls through.
The climate does the heavy lifting here. Intense heat bakes grease out of hinge bearings. Heavy rain and occasional flooding work water into operator housings and underground conduit. We see more lightning-related control board failures in Missouri City than in almost any other part of our service area – a storm rolls through, the power flickers, and the board inside a gate operator gives up. Homes with long driveways also mean longer cable runs, and every extra foot of buried wire is another place for moisture or an errant sprinkler line to cause a short.
Then there are the HOAs. Sienna, Riverstone, and several other Missouri City communities enforce gate appearance standards. If your community requires specific iron profiles, certain paint colors, or a uniform operator housing, we’ll work within those rules. It’s part of doing gate work here, and it changes what parts we recommend.
Styles & brands we work with





Our Main Missouri City Services
Most Missouri City homeowners call us about one of three things: a gate that stopped working, a gate they want installed, or an electric opener that’s acting up. Each has its own service page for Missouri City – here’s a quick look at what each job involves.
Gate Repair in Missouri City
Repair work in Missouri City usually starts with a sagging iron gate or a post that’s leaned out of plumb after a wet season. We rebuild hinges, cut and re-weld frames, replace bent pickets, and pull the gate back into proper alignment so it closes cleanly against the latch. On older subdivision gates near Kiamesha Drive and Quail Valley, we often find worn hinge bearings and rusted hardware that’s been quietly failing for years. Gate Repair in Missouri City covers what we fix, what it costs, and how fast we can get there.

Gate Installation in Missouri City
New gate work in Missouri City means working around HOA specs, long driveway runs, and the occasional need for an operator that can handle a heavy iron gate. We install ornamental iron, steel, and aluminum driveway gates, set posts in concrete, hang the gate, and run operators and safety hardware. In Sienna and Riverstone, we regularly coordinate with HOA requirements before the first post hole is dug. Gate Installation in Missouri City has the full process, timeline, and written pricing approach.

Electric Gate Repair in Missouri City
When an electric gate in Missouri City won’t open or won’t close, the problem is usually the operator, the sensors, or the board. Missouri City’s frequent afternoon storms and lightning activity make surge-damaged control boards a common call. We service LiftMaster, FAAC, and Linear openers throughout communities like Sienna and up toward Highway 6. Electric Gate Repair in Missouri City explains what we diagnose and how the 365-day guarantee works on electrical work.

What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service in Missouri City
Our technicians service LiftMaster, FAAC, BFT, and Linear gate operators, along with five other major brands. We keep common control boards, remotes, and safety sensors in stock, so a Missouri City repair often gets done in a single visit. See our brands for the full list.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Company in Missouri City, TX
| Service | Typical range in Missouri City |
|---|---|
| Gate repair diagnostic visit | $75 – $120 |
| Hinge replacement (per pair) | $180 – $320 |
| Gate frame welding and straightening | $220 – $450 |
| Gate post reset (steel post, concrete base) | $260 – $500 |
| Operator replacement (basic swing arm) | $650 – $1,100 |
| Control board replacement | $250 – $550 |
| Safety sensor replacement (pair) | $145 – $260 |
| Gate remote programming | $60 – $120 |
| Battery backup replacement | $180 – $350 |
| Full gate installation (single swing, incl. operator and posts) | $3,500 – $7,500 |
Prices in Missouri City run slightly higher than in older Houston neighborhoods because longer driveways mean longer cable runs and larger operators. Every quote we give is written and agreed to before the first bolt gets turned – no surprises added at the end of the job.
Neighborhoods We Serve in Missouri City
We run service calls across all of Missouri City, from the older streets near Texas Parkway to the newer patches in Sienna and Riverstone. Our typical arrival window is 2 – 4 hours for most repair work.
- Sienna
- Riverstone
- Quail Valley
- Lake Olympia
- First Colony
Service Area – Cities Near Missouri City
Our Missouri City technicians also cover nearby communities including Fresno, TX, Bellaire, TX, Manvel, TX, and Rosenberg, TX. If you’re in one of these areas, you’ll reach the same live-person dispatch line.
Serving Missouri City, TX - Our Local Coverage Area
We’re based in the Missouri City area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Missouri City
Most Missouri City calls are handled same-day, with a typical arrival window of 2 – 4 hours for repairs. Emergency calls for a gate stuck open or closed get priority scheduling. Call (325) 378-0676 and we’ll give you a real window, not a four-hour shrug.
In Sienna, Riverstone, and some other Missouri City communities, yes. Exterior changes to gates, posts, or operator housings often require HOA approval. We’ll help you identify what’s needed and won’t start work that conflicts with your community’s written rules.
We serve all of Missouri City including Sienna, Riverstone, Quail Valley, Lake Olympia, and First Colony. We also handle calls in Fresno, Bellaire, Manvel, and Rosenberg. Dispatch is coordinated from our Houston office, with local crews handling Missouri City jobs directly.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Missouri City Customers Say
"The gate works great now. Only thing is the first tech couldn't find the wiring fault and they had to send a second guy the next day. Second visit nailed it and they didn't charge me twice."
- Chuck Alderman"Good repair on a sagging gate and a new hinge welded on. Took them a couple days to get the part in, but they told me that up front and it's been solid since."
- Hector Villanueva"Gate was dragging and screeching across the driveway. I figured I'd need a whole new setup. He adjusted the track and rollers and it was a fraction of what I expected. Honest work."
- Omar Haddad