Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGate Company in Pasadena, TX
Gate repair in Pasadena usually means one of three things: a swing gate that won’t swing, a slide gate grinding against its track, or an opener that hums but won’t move the leaf. Most repairs run $180 – $480, and we can typically get a technician to your driveway the same day you call. The catch in Pasadena is the air itself – salty, humid, and laced with petrochemical residue from the Ship Channel corridor. It eats steel faster than you’d expect, and it changes how we diagnose, prep, and finish every job here.
Call (325) 378-0676 and you’ll speak to a live person, not a voicemail tree, any hour of the day or night.
Why Pasadena Homes Are Different
Pasadena’s housing stock is mostly single-family ranch homes and two-story brick veneers built between the 1960s and 1990s, many with long driveways and detached garages set well back from the street. A good number of those driveways have gates that were installed when the home was built and have been fighting the weather ever since. Most are tubular steel or wrought iron, sliding or swinging on hardware that’s now thirty to fifty years old.
The failure pattern here is predictable once you know what to look for. Gates within a mile or two of the Ship Channel refineries pit and corrode on the side facing the prevailing southeast wind. The same gate in a northern Pasadena neighborhood, farther from the refineries but still bathed in humidity, fails at the bottom rail instead, where lawn sprinklers soak the metal every morning. Add Galveston Bay’s salt air, about fifteen miles to the southeast, and exposed welds start spalling within a few seasons.
Hurricane and tropical storm winds put a different kind of stress on these systems. A heavy gate swinging freely in a wind gust turns into a lever against its own hinges and the opener’s rack. We see bent hinge posts, sheared rack bolts, and stripped limit cams after every named storm. It’s not dramatic. It’s just physics, and it’s why a Pasadena repair often means realigning the whole leaf, not just swapping one part.
Styles & brands we work with
Our Main Pasadena Services
Most calls we take in Pasadena fall into three buckets: a gate that won’t move at all, a gate that needs replacing outright, or an opener that’s failed while the gate itself is still solid. Each of those has its own dedicated Pasadena page below.
Gate Repair in Pasadena
A gate repair in Pasadena might be a snapped hinge, a sagging leaf dragging on the concrete, or a slide gate jumping its track. We start by finding out why it failed, not just patching the visible damage. On the Ship Channel side of town, that frequently means cleaning and treating the corrosion at the weld points before reinforcing the joint. On a sprinkler-soaked bottom rail, we’ll address the rust-through and adjust the gate’s clearance so it stops sitting in water. Our Gate Repair in Pasadena page covers the full scope, including same-day response for a gate stuck open or shut.
Gate Installation in Pasadena
A new gate in Pasadena has to be built for this climate from day one: galvanized or powder-coated steel, stainless hardware, and concrete footings poured deep enough to hold up under hurricane-force wind. We measure the opening, check the driveway’s slope, and confirm whether the existing opener can handle the new gate’s weight before we ever order material. Installation is not a same-day job; it’s measured, quoted in writing, and scheduled. See Gate Installation in Pasadena for what a full replacement involves and what it costs here.
Electric Gate Repair in Pasadena
When the opener is the problem, the gate itself is often fine. The actuator (the motorized arm that physically pushes or pulls the gate) may have burned out, a control board may have failed after a power surge, or the safety sensors may have been knocked out of alignment. Pasadena’s humidity gets inside sealed housing, too, corroding terminal strips and circuit boards. We carry parts for LiftMaster, FAAC, BFT, and Linear, among others, so most electric repairs are one visit. Our Electric Gate Repair in Pasadena page details common opener failures and typical repair costs.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service in Pasadena
We service all nine major gate-operator brands, including LiftMaster, FAAC, BFT, and Linear. Our trucks carry common control boards, actuators, and safety sensors for these systems, which means a Pasadena repair is often finished in one visit rather than two. You can see the full list and what each brand typically needs over on our brands page.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Company in Pasadena, TX
| Service | Typical range in Pasadena |
|---|---|
| Gate repair (general troubleshooting and minor fix) | $120 – $300 |
| Hinge replacement (weld-on steel hinges) | $180 – $380 |
| Slide gate roller or truck assembly replacement | $200 – $450 |
| Weld repair at stress points (single location) | $150 – $350 |
| Fence post or gate post reset in concrete | $250 – $550 |
| Swing gate actuator swap (residential) | $450 – $850 |
| Control board replacement (basic single-gate systems) | $300 – $600 |
| Photo-eye or safety sensor replacement | $150 – $350 |
| Full gate installation (single swing gate, standard steel) | $1,800 – $4,500 |
| Electric gate opener installation (operator + labor) | $1,200 – $3,200 |
Two things push Pasadena prices toward the top of those ranges: heavy corrosion that makes fasteners snap instead of turn, and gates that have drifted so far out of alignment that the job becomes a structural correction rather than a parts swap. Either way, you’ll have a written price before any work starts, with the total agreed up front. No surprises after the gate’s already in pieces.
Neighborhoods We Serve in Pasadena
We work all over Pasadena, from the neighborhoods along Spencer Highway down to the streets near the Bayport Channel and over toward the Beltway. Here are a few of the areas we run calls through regularly:
- Vista Villas
- Golden Acres
- Parkgate
- Red Bluff Terrace
- Clearwater Estates
Most Pasadena repair calls get a technician out same-day. If parts have to be ordered for an older opener, we’ll tell you that up front and give you a real arrival window for the follow-up.
Service Area – Cities Near Pasadena
Pasadena sits in the middle of our greater Houston coverage area, so a lot of our work spills into the neighboring cities. We run regular routes through South Houston, TX, north into Houston, TX proper, down the Gulf Freeway toward Friendswood, TX, and over to the bay side in Seabrook, TX. If you’re just over the line and need a gate looked at, call and we’ll tell you straight whether we can schedule it.
Serving Pasadena, TX - Our Local Coverage Area
We’re based in the Pasadena area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Pasadena
Most repair calls in Pasadena are answered same-day, often within a few hours. If your gate is stuck open or shut, say so when you call (325) 378-0676 and we’ll treat it as a priority. Installations and new opener work are scheduled, not dispatched same-day, because that work is measured and quoted first.
Pasadena requires permits for new gate installations that include electrical work, and many subdivisions with HOAs want design approval before anything goes up. We can advise you on what applies to your street, but the permit or approval itself comes from the city or your HOA. We’ll build to whatever they require. Call for specifics on your property.
Yes. Rust at weld points, bottom rails, and hinge posts is the most common Pasadena failure we see. We grind back the corrosion, assess how much steel remains, and either weld in a repair plate or tell you honestly if the gate’s reached the end of its life. You’ll have that answer in writing, with a price, before any work begins.
If your gate is acting up in Pasadena, call (325) 378-0676 now. A live person answers around the clock, the estimate is free, and the price you approve is the price you pay. Every repair is backed by our 365-Day Done Right Promise, in writing, on the invoice.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Pasadena Customers Say
"Installed a new gate for us after the old wooden one rotted out. Clean work, showed up on time both days, and the written price didn't change. It swings perfectly."
- Donna Kirkpatrick"Hinge sheared off our heavy iron gate. They welded a new one on and it's sturdier than before. Showed up on time and cleaned the driveway after the welding."
- Rhonda Mikula"The gate works great now. Only thing is the first tech couldn't find the wiring fault and they had to send a second guy the next day. Second visit nailed it and they didn't charge me twice."
- Chuck Alderman