Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGate Company in Fresno, TX
Gate repair in Fresno usually comes down to three things: the age of the gate, the weight of the gate, and what the clay soil under the posts has done lately. Most Fresno driveways were built between the 1950s and 1990s, so we regularly work on heavy ornamental steel and solid wood gates that are now decades old, with operators that predate modern smart-home integration. If your gate won’t open, sags on its hinges, or grinds when it moves, we’ll give you a real price before any work starts. Call (325) 378-0676 and a live person answers, day or night.
Why Fresno Homes Are Different
Fresno’s housing stock leans toward single-story ranch and Mediterranean homes on oversized lots, and a lot of those properties share the same story: a custom driveway gate installed when the house was built, then left to fight the San Joaquin Valley clay for twenty or thirty years. Expansive soil expands when wet and contracts when dry, which slowly rocks gate posts out of plumb. That’s why we see so many gates in Fresno that refuse to latch, scrape the driveway, or bind against the post.
The other factor is the sun. Fresno summers are long and hot, which dries out wood gates until they crack and warps powder-coated steel just enough to throw off the alignment. Dust from the valley floor settles into roller tracks and operator housings, building up into a grit that wears down plastic gears and limit switches faster than you’d expect. In neighborhoods like Fig Garden and along the Bluff, older automatic gates still run original chain-drive openers with exposed gear racks, and the heat has often made the plastic limit switches so brittle they snap during a normal cycle. That’s a repair we diagnose on the first visit, because it looks like a motor failure but usually isn’t.
Styles & brands we work with
Our Main Fresno Services
The two calls we get most often from Fresno homeowners are for gates that won’t move and gates that need to be replaced outright. Each service has its own page with local pricing and specifics.
Gate Repair in Fresno
A Fresno gate repair usually starts with a post that has shifted in the clay, a hinge that has worn oval, or an operator that has lost its limit settings. We weld cracked frames, reset posts in fresh concrete, replace hinge bearings, and re-align gates that have drifted over the years. On older Fresno estates, chain-drive systems with brittle switches are a common culprit, and we’d rather replace the switch than sell you a whole new operator. For full pricing and what to expect, see Gate Repair in Fresno.
Gate Installation in Fresno
New gate installation in Fresno means designing for the soil, not just the driveway width. Posts need to be set below the clay’s active movement zone, and the gate itself has to account for summer expansion and winter moisture. We handle custom ornamental steel and wood driveway gates, including the operator and safety edges. For a measured, written quote on a full installation, see Gate Installation in Fresno.
Electric Gate Repair in Fresno
When a Fresno electric gate stops responding, the problem is usually the operator, the safety sensors, or the power feed. Valley heat bakes circuit boards, dust coats the photo eyes, and older wiring on long rural runs can drop voltage enough to confuse the motor. We test the full circuit before replacing parts, so you’re not paying for a board when the issue is a corroded wire nut. See Electric Gate Repair in Fresno for detailed pricing and what’s covered.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service in Fresno
We service LiftMaster, FAAC, BFT, and Linear operators, among others. Our techs carry common replacement boards, limit switches, and remote receivers for these brands, which means most Fresno jobs are finished on the first visit rather than waiting on a part. See our brands for the full list.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Company in Fresno, TX
| Service | Typical range in Fresno |
|---|---|
| Gate off track / re-align | $180 – $320 |
| Hinge replacement (heavy driveway gate) | $250 – $450 |
| Post reset in concrete | $300 – $650 |
| Operator replace (residential swing) | $800 – $1,500 |
| Limit switch replacement | $120 – $220 |
| Sensor / photo eye repair | $150 – $300 |
| Power supply repair | $200 – $400 |
| Full gate installation (materials + labor) | $2,500 – $8,000 |
Fresno pricing is pushed up by long driveway runs, heavy custom gates, and the extra concrete depth needed in expansive clay soil. Whatever the number is, you’ll see it in writing before we turn a single bolt, and it won’t change when the job is done.
Neighborhoods We Serve in Fresno
We run calls across Fresno, from the older estate lots to the newer developments on the city’s edge. Most neighborhoods can be reached within an hour or two of your call, depending on the time of day and where our nearest tech is finishing up.
- Fig Garden
- The Bluff
- Fresno High area
- West Fresno
- Sunnyside
Service Area – Cities Near Fresno
We also take gate repair calls in the communities around Fresno. If you’re in Missouri City, TX, Manvel, TX, Bellaire, TX, or Friendswood, TX, the same written pricing and 365-day guarantee apply.
Serving Fresno, TX - Our Local Coverage Area
We’re based in the Fresno area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Fresno
Most Fresno neighborhoods are reachable within a couple of hours, and we’ll give you a real arrival window when you call, not a vague “sometime today.” Emergency calls are answered by a live person 24/7. Call (325) 378-0676 to find out when we can be there.
It depends on your subdivision’s covenants. Some Fresno HOAs require design review for a full gate replacement, though repair work on an existing gate usually doesn’t need approval. We’re glad to work from your HOA’s written requirements if they ask for specs or material details.
Every repair carries the 365-Day Done Right Promise: a written guarantee on the invoice, and if the repair fails inside twelve months, we come back and fix it at no charge. That includes the second visit, the parts, and the labor. Call (325) 378-0676 and we’ll walk you through what your repair would cost before scheduling anything.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Fresno Customers Say
"Good repair on a sagging gate and a new hinge welded on. Took them a couple days to get the part in, but they told me that up front and it's been solid since."
- Hector Villanueva"Gate was dragging and screeching across the driveway. I figured I'd need a whole new setup. He adjusted the track and rollers and it was a fraction of what I expected. Honest work."
- Omar Haddad"Our driveway gate stopped halfway and wouldn't close, which is a problem when it's the only thing between the street and the yard. They came out same day, replaced the motor, and it's smooth again."
- Leonard Pace